{"product_id":"lonseal-650-two-part-epoxy-for-flooring","title":"Lonseal #650 Two-Part Epoxy for Flooring","description":"\u003cdiv\u003e\u003cstrong\u003eSee important post-delivery check information below the video below.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eReady to install your\u003cstrong\u003e Lonseal flooring? Lonseal #650 Two-Part Epoxy for Flooring\u003c\/strong\u003e is easy to use and install in vans, RVs, boats, trailers and more. Simply mix the two part solution together in the bucket provided and quickly smooth on to your level surface with the Lonseal U-Notch Trowel for a thin, even coat. Once your epoxy is smoothed onto your surface, install your Lonseal from the center outward, smoothing the flooring over the epoxy with a silicone roller to eliminate air bubbles. Allow several hours to ensure proper setting of epoxy before walking or placing items on your Lonseal flooring. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eKey Features: Lonseal #650 Two-Part Epoxy for Flooring\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWet set adhesive\u003c\/li\u003e\n\u003cli\u003eCRI Green Label Plus Certified #GLP59909\u003c\/li\u003e\n\u003cli\u003eApplications:\n\u003cul\u003e\n\u003cli\u003eProperly prepared, non-porous substrates and existing vinyl floors\u003c\/li\u003e\n\u003cli\u003eLocations with temperature extremes, such as saunas, cold-storage, or walk-in freezers\u003c\/li\u003e\n\u003cli\u003eAreas where flooding is possible, including around drains, shower areas, public bathrooms, pool\/whirlpool aprons, or laundry rooms\u003c\/li\u003e\n\u003cli\u003eAreas expecting heavy point loading or heavy\/dynamic rolling loads, like hospital beds\u003c\/li\u003e\n\u003cli\u003eCan be used on properly prepared, non-porous substrates and existing vinyl floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eApplication Information:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesive must be applied by a trowel with 1\/16\" x 1\/32\" x 1\/32\" U-Notches (Model ZZ800 Trowel Sold Separately). These specs are specifically recommended by the adhesive MFG. If applied incorrectly the flooring will not lay properly.\u003c\/li\u003e\n\u003cli\u003eApprox. Spread rate: H\u003cspan\u003ealf-gallon: 85-100 square feet; Gallon: \u003c\/span\u003e170 - 225 sq. ft. *\u003c\/li\u003e\n\u003cli\u003eOpen time: Up to 15 minutes\u003c\/li\u003e\n\u003cli\u003eWorking time: Up to 15 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNotes:\u003c\/b\u003e Trowel sizes listed are by width\/depth\/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.\u003c\/p\u003e\n\u003cp\u003e*Actual job site spread rate will vary depending on the substrate conditions.\u003c\/p\u003e\n\u003cp\u003eOPEN TIME: Waiting time required before placing the flooring material into the adhesive.\u003c\/p\u003e\n\u003cp\u003eWORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.\u003c\/p\u003e\n\u003ch2\u003eSpecifications: Lonseal #650 Two-Part Epoxy for Flooring\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 1\/2 Gallon, 1 Gallon\u003c\/li\u003e\n\u003cli\u003eStyle: 2-Part Epoxy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments: Lonseal #650 Two-Part Epoxy for Flooring\u003c\/h2\u003e\n\u003cp\u003eTechnical Data Sheet\u003c\/p\u003e\n\u003cp\u003eSafety Data Sheet\u003c\/p\u003e\n\u003cp\u003eLonseal Vehicle installation (PDF)\u003c\/p\u003e\n\u003ch2\u003eVideo: Lonseal #650 Two-Part Epoxy for Flooring\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/1Vwnh-ZbgWA\" title=\"YouTube video player\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePost-Delivery Check\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePart B(smaller bottle) will be packaged within Part A bucket contents. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSometimes the part-B bottle becomes submerged and it may appear to be missing, check within the part-A contents for the activator bottle. Also, check that the seal of the Part-B bottle + the seal of the pail itself were still intact upon delivery.\u003cbr\u003e\u003cbr\u003eTrace contaminants (like tiny fragments of the plastic bottle seal) do not compromise the overall effectiveness of the epoxy chemically. Change in pressure and handling of the package can make the bucket appear to be deformed, but note this is normal due to the chemical contents and their effect on the bucket during shipping. As long as all seals are in tact and not exposed to the open air, it's okay to proceed with using per instructions above. \u003cmeta charset=\"utf-8\"\u003eBecause the two liquids remain completely separate and contained within their own packaging, the epoxy is still usable.\u003c\/p\u003e","brand":"Perfect Fit","offers":[{"title":"Gallon","offer_id":67772176269395,"sku":"vbk1792591411125","price":85.04,"currency_code":"USD","in_stock":true},{"title":"Half Gallon","offer_id":67772176302163,"sku":"brl1792591411126","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0643\/2269\/9347\/files\/lonseal-650-two-part-epoxy-for-flooring_1.jpg?v=1792591417","url":"https:\/\/www.elqavora.com\/products\/lonseal-650-two-part-epoxy-for-flooring","provider":"Elqavora Shop","version":"1.0","type":"link"}